Tailoring Metal-Organic Frameworks and Derived Materials for High-Performance Zinc-Air and Alkaline Batteries.

Developing multifunctional materials from earth-abundant elements is urgently needed to satisfy the demand for sustainable energy. Herein, we demonstrate a facile approach for the preparation of a metal-organic framework (MOF)-derived Fe2O3/C, composited with N-doped reduced graphene oxide (MO-rGO). MO-rGO exhibits excellent bifunctional electrocatalytic activities toward the oxygen evolution reaction (ηj=10 = 273 mV) and the oxygen reduction reaction (half-wave potential = 0.77 V vs reversible hydrogen electrode) with a low ΔEOER-ORR of 0.88 V in alkaline solutions. A Zn-air battery based on the MO-rGO cathode displays a high specific energy of over 903 W h kgZn-1 (∼290 mW h cm-2), an excellent power density of 148 mW cm-2, and an open-circuit voltage of 1.430 V, outperforming the benchmark Pt/C + RuO2 catalyst. We also hydrothermally synthesized a Ni-MOF that was partially transformed into a Ni-Co-layered double hydroxide (MOF-LDH). A MO-rGO||MOF-LDH alkaline battery exhibits a specific energy of 42.6 W h kgtotal mass-1 (106.5 µW h cm-2) and an outstanding specific power of 9.8 kW kgtotal mass-1 (24.5 mW cm-2). This work demonstrates the potential of MOFs and MOF-derived compounds for designing innovative multifunctional materials for catalysis, electrochemical energy storage, and beyond.

Beyond steric selectivity of ions using ångström-scale capillaries.

Ion-selective channels play a key role in physiological processes and are used in many technologies. Although biological channels can efficiently separate same-charge ions with similar hydration shells, it remains a challenge to mimic such exquisite selectivity using artificial solid-state channels. Although there are several nanoporous membranes that show high selectivity with respect to certain ions, the underlying mechanisms are based on the hydrated ion size and/or charge. There is a need to rationalize the design of artificial channels to make them capable of selecting between similar-sized same-charge ions, which, in turn, requires an understanding of why and how such selectivity can occur. Here we study ångström-scale artificial channels made by van der Waals assembly, which are comparable in size with typical ions and carry little residual charge on the channel walls. This allows us to exclude the first-order effects of steric- and Coulomb-based exclusion. We show that the studied two-dimensional ångström-scale capillaries can distinguish between same-charge ions with similar hydrated diameters. The selectivity is attributed to different positions occupied by ions within the layered structure of nanoconfined water, which depend on the ion-core size and differ for anions and cations. The revealed mechanism points at the possibilities of ion separation beyond simple steric sieving.

Phase-Dependent Energy Storage Performance of the NixSey Polymorphs for Supercapacitor-Battery Hybrid Devices.

Transition-metal chalcogenides have emerged as a promising class of materials for energy storage applications due to their earth abundance, high theoretical capacity, and high electrical conductivity. Herein, we introduce a facile and one-pot electrodeposition method to prepare high-performance nickel selenide NixSey (0.5 ≤ x/y ≤ 1.5) nanostructures (specific capacity = 180.3 mA h g-1 at 1 A g-1). The as-synthesized nickel selenide (NS) nanostructure is however converted to other polymorphs of nickel selenide including orthorhombic NiSe2, trigonal Ni3Se2, hexagonal NiSe, and orthorhombic Ni6Se5 over cycling. Interestingly, NiSe2 and Ni3Se2 polymorphs that display a more metallic character and superior energy storage performance are the predominant phases after a few hundred cycles. We fabricated a hybrid device using activated carbon (AC) as a supercapacitor-type negative electrode and NS as a high-rate battery-type positive electrode (AC||NS). This hybrid device provides a high specific energy of 71 W h kg-1, an excellent specific power of up to 31 400 W kg-1, and exceptional cycling stability (80% retention of the initial capacity after 20 000 cycles). The higher energy storage performance of the device is a result of the development of high-performance NiSe2 and Ni3Se2 polymorphs. Moreover, the reduction of the critical dimension of the NS particles to the nanoscale partially induces an extrinsic pseudocapacitive behavior that improves the rate capability and durability of the device. We also explored the origin of the superior energy storage performance of the NS polymorphs using density functional theory calculations in terms of the computed density of states around the Fermi level, electrical conductivity, and quantum capacitance that follows the trend NiSe2 > Ni3Se2 > NiSe > Ni6Se5. The present study thus provides an appealing approach for tailoring the phase composition of NS as an alternative to the commonly used templated synthesis methods.

The Effect of Dual Bioactive Compounds Artemisinin and Metformin Co-loaded in PLGA-PEG Nano-particles on Breast Cancer Cell lines: Potential Apoptotic and Anti-proliferative Action.

The most prevalent malignancy among women is breast cancer. Phytochemicals and their derivatives are rapidly being recognized as possible cancer complementary therapies because they can modify signaling pathways that lead to cell cycle control or directly alter cell cycle regulatory molecules. The phytochemicals' poor bioavailability and short half-life make them unsuitable as anticancer drugs. Applying PLGA-PEG NPs improves their solubility and tolerance while also reducing drug adverse effects. According to the findings, combining anti-tumor phytochemicals can be more effective in regulating several signaling pathways linked to tumor cell development. The point of the study was to compare the anti-proliferative impacts of combined artemisinin and metformin on cell cycle arrest and expression of cyclin D1 and apoptotic genes (bcl-2, Bax, survivin, caspase-7, and caspase-3), and also hTERT genes in breast cancer cells. T-47D breast cancer cells were treated with different concentrations of metformin (MET) and artemisinin (ART) co-loaded in PLGA-PEG NPs and free form. The MTT test was applied to assess drug cytotoxicity in T47D cells. The cell cycle distribution was investigated using flow cytometry and the expression levels of cyclin D1, hTERT, Bax, bcl-2, caspase-3, and caspase-7, and survivin genes were then determined using real-time PCR. The findings of the MTT test and flow cytometry revealed that each state was cytotoxic to T47D cells in a time and dose-dependent pattern. Compared to various state of drugs (free and nano state, pure and combination state) Met-Art-PLGA/PEG NPs demonstrated the strongest anti-proliferative impact and considerably inhibited the development of T-47D cells; also, treatment with nano-formulated forms of Met-Art combination resulted in substantial downregulation of hTERT, Bcl-2, cyclin D1, survivin, and upregulation of caspase-3, caspase-7, and Bax, in the cells, as compared to the free forms, as indicated by real-time PCR findings. The findings suggested that combining an ART/MET-loaded PLGA-PEG NP-based therapy for breast cancer could significantly improve treatment effectiveness.

Trilayer Metal-Organic Frameworks as Multifunctional Electrocatalysts for Energy Conversion and Storage Applications.

The need for enhanced energy storage and improved catalysts has led researchers to explore advanced functional materials for sustainable energy production and storage. Herein, we demonstrate a reductive electrosynthesis approach to prepare a layer-by-layer (LbL) assembled trimetallic Fe-Co-Ni metal-organic framework (MOF) in which the metal cations within each layer or at the interface of the two layers are linked to one another by bridging 2-amino-1,4-benzenedicarboxylic acid linkers. Tailoring catalytically active sites in an LbL fashion affords a highly porous material that exhibits excellent trifunctional electrocatalytic activities toward the hydrogen evolution reaction (ηj=10 = 116 mV), oxygen evolution reaction (ηj=10 = 254 mV), as well as oxygen reduction reaction (half-wave potential = 0.75 V vs reference hydrogen electrode) in alkaline solutions. The dispersion-corrected density functional theory calculations suggest that the prominent catalytic activity of the LbL MOF toward the HER, OER, and ORR is due to the initial negative adsorption energy of water on the metal nodes and the elongated O-H bond length of the H2O molecule. The Fe-Co-Ni MOF-based Zn-air battery exhibits a remarkable energy storage performance and excellent cycling stability of over 700 cycles that outperform the commercial noble metal benchmarks. When assembled in an asymmetric device configuration, the activated carbon||Fe-Co-Ni MOF supercapacitor provides a superb specific energy and a power of up to 56.2 W h kg-1 and 42.2 kW kg-1, respectively. This work offers not only a novel approach to prepare an LbL assembled multimetallic MOF but also provides a benchmark for a multifunctional electrocatalyst for water splitting and Zn-air batteries.

Breakdown of Universal Scaling for Nanometer-Sized Bubbles in Graphene.

We report the formation of nanobubbles on graphene with a radius of the order of 1 nm, using ultralow energy implantation of noble gas ions (He, Ne, Ar) into graphene grown on a Pt(111) surface. We show that the universal scaling of the aspect ratio, which has previously been established for larger bubbles, breaks down when the bubble radius approaches 1 nm, resulting in much larger aspect ratios. Moreover, we observe that the bubble stability and aspect ratio depend on the substrate onto which the graphene is grown (bubbles are stable for Pt but not for Cu) and trapped element. We interpret these dependencies in terms of the atomic compressibility of the noble gas as well as of the adhesion energies between graphene, the substrate, and trapped atoms.

The interaction between atomic-scale pores and particles.

Using first-principles calculations for angstrom-sized pores (3-10 Å), we investigate pore-particle interaction. The translocation energy barrier (TEB) plays important role for the angstrom-scale pores created in 2D-materials such as graphene which is calculated for the translocation of rare gases (He, Ne, Ar, Xe), diatomic molecules (H2and N2), CO2, and CH4. The critical incident angle (the premeance beyond that is zero) was found to be 40°, which is different from classical model's prediction of 19-37°. The calculated TEB (Δ) and the surface diffusion energy barrier (Δ') for the particles with small kinetic diameter (He, Ne and H2), show that the direct flow is the dominant permeation mechanism (Δ ≈ 0 and Δ' > 30 meV). For the other particles with larger kinetic diameters (Ar, Kr, N2, CH4and CO2), we found that both surface diffusion and direct flow mechanisms are possible, i.e. Δ and Δ' ≠ 0. This work provides important insights into the gas permeation theory and into the design and development of gas separation and filtration devices.

Theoretical investigation of the interaction between the metal phthalocyanine [MPc]a(M = Sc, Ti, and V; a = -1, 0, and +1) complexes and formaldehyde.

Formaldehyde (FA, CH2O) is one of the toxic volatile organic compounds that cause harmful effects on the human body. In this work, the interaction of FA gas with metal phthalocyanine (MPc) molecules was studied by employing density functional theory calculations. A variety of [MPc]a (M = Sc, Ti, and V; a = -1, 0, and +1) complexes were studied, and the electronic properties, interaction energies, and charge transfer properties of all of the studied molecules were systematically discussed. Among the studied complexes, the Sc and Ti phthalocyanines were more reactive toward the adsorption of FA gas. Moreover, it was revealed that the interaction of the [ScPc]+1 and [TiPc]0 complexes with the CH2O molecule was stronger, in which the highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) energy gap of 46% and 36% decreased after FA adsorption. The results indicated that the MPc-based materials may be a promising candidate for the detection of FA gas.

Gas flow through atomic-scale apertures.

Gas flows are often analyzed with the theoretical descriptions formulated over a century ago and constantly challenged by the emerging architectures of narrow channels, slits, and apertures. Here, we report atomic-scale defects in two-dimensional (2D) materials as apertures for gas flows at the ultimate quasi-0D atomic limit. We establish that pristine monolayer tungsten disulfide (WS2) membranes act as atomically thin barriers to gas transport. Atomic vacancies from missing tungsten (W) sites are made in freestanding (WS2) monolayers by focused ion beam irradiation and characterized using aberration-corrected transmission electron microscopy. WS2 monolayers with atomic apertures are mechanically sturdy and showed fast helium flow. We propose a simple yet robust method for confirming the formation of atomic apertures over large areas using gas flows, an essential step for pursuing their prospective applications in various domains including molecular separation, single quantum emitters, sensing and monitoring of gases at ultralow concentrations.

Kinetics and Mechanism of the NH (X3Σ-) + SO (X3Σ-) Reaction: A Theoretical Approach.

The reaction mechanism, product branching ratios, and relevant rate constants for the reaction of imidogen (NH) with sulfur monoxide (SO) over singlet and triplet potential energy surfaces are theoretically investigated. Various quantum chemical methods at the single-reference methods (PBE, M06-2X, MP2, GBS-QB3, G3MP2B3, and CCSD(T)) and the multi-reference methods of CASPT2 are carried out to examine the characteristics of the title reaction's potential energy surface. Eighteen chemically activated intermediates and more than 35 different reaction channels are predicted over the singlet surface, while less species and channels are distinguished over the triplet surface. The entrance channels for both surfaces appeared to be barrier-less association reactions to form pre-reaction energized intermediates of singlet or triplet HNSO or HNOS. OH and NS radicals are indicated as the major products for the title reaction on both surfaces in agreement with the reported experimental observations. The RRKM-steady state approximation method is used to calculate the rate constants and branching ratios of the main products. The obtained overall rate constant is in agreement with the available reported experimental data over the wide range of temperature from 300 to 3000 K. By considering single-reference calculations, the singlet and triplet total rate constants were found to be k(T) = 5.04 × 1010 and 2.47 × 1012 T-0.83 exp(-1.56 kJ mol-1/T), respectively. Also, the total rate constant for the consumption of reactants by inclusion of multi-reference calculations was found to be in the range of 3.86 × 1010 to 4.18 × 1010, depending on the level of calculations. In addition, our results revealed that the total rate constant for the NH + SO reaction is pressure-independent in the range of 0.1-2000 Torr.

The interplay between structural perfectness and CO oxidation catalysis on aluminum, phosphorous and silicon complexes of corroles.

Catalytic oxidation of carbon monoxide on perfect and defective structures of corrole complexes with aluminum, phosphorous and silicon have been investigated by performing density functional theory calculations. The main objective is to highlight the effect of structural defects on the catalytic activity of corrole complexes for the CO oxidation reaction. Moreover, we also study how phenyl substitution at the meso or axial position of the corrole will affect its catalytic efficiency. It is shown that a vacancy defect leads to the formation of an interior cavity inside the corrole structure which hinders proper orientation of reacting O2 and CO molecules. While corrole complexes with aluminum may serve as potential catalysts for CO oxidation with a moderate energy barrier, phosphorous corrole displays superior catalytic activity with a very low energy barrier. We also demonstrate that phenyl substitution at the axial position reduces the catalytic activity of corrole complexes, whereas phenyl substitution at the meso sites does not change the activity of corrole complexes toward O2 and CO molecules. The results of the present study are promising to develop highly efficient single atom phosphorous-nitrogen-carbon catalysts for low temperature CO oxidation.